中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 20847.2-2013 小艇 防火 第2部分:艇體長度大於15m 的艇(中英文版) Small craft - Fire protection - Part 2: Craft with a hull length of over 15m |
|||
FZ/T 50011-1999 假撚變形絲殘餘扭矩試驗方法(中英文版) Test method for residual torque of false twisted textured yarns |
|||
GB 3836.11-2008 爆炸性環境 第11部分:由隔爆外殼“d”保護的設備 最大試驗安全間隙測定方法(中英文版) Explosive atmospheres - Part 11: Equipment protection by flameproof enclosures "d" - Method of test for ascertainment of maximum experimental safe gap |
|||
GB 10055-2007 施工升降機安全規程(中英文版) Safety code for builder’s hoist |
|||
JJG 809-1993 數位式石英晶體測溫儀(中英文版) Verification Regulation of Digital Temperature Indicators With Quarze Crystal Sensors |
|||
NB/T 20006.11-2010 壓水堆核電廠用合金鋼 第11部分:穩壓器筒體、封頭用錳-鎳-鉬鋼鍛件(中英文版) Alloy steel for pressurized water reactor nuclear power plants. Part 11: Mn-Ni-Mo steel forgings for pressurizer shells and heads |
|||
GB/T 32289-2015 大型鍛件用優質碳素結構鋼和合金結構鋼(中英文版) Quality carbon structure steels and alloy structure steels for large forgings |
|||
SJ/Z 9187-1995 錄影機用500v 1類瓷介電容器認定規範(中英文版) Specifications for determination of porcelain capacitors 500V class A used for VCR |
|||
GB/T 17959-2000 資訊技術 系統間遠端通訊和資訊交換 50插針介面連接器配合性尺寸和接觸件編號分配(中英文版) Information technology--Telecommunications and information exchangebetween systems--50-Pole interface connector mateability dimensions and contact number assignments |
|||
TB/T 2296-1991 計軸設備通用技術要求(中英文版) (General technical conditions axle equipment) |
|||
HG/T 5003-2016 靜電防止劑sn(中英文版) (Electrostaticproofing agent SN) |
|||
GB/T 24721.2-2009 公路用玻璃纖維增強塑膠產品 第2部分:管箱(中英文版) Glass fiber reinforced plastic product for highway - Part 2: Trunk |
|||
HG/T 3165-1986 碳鋼玻璃浮子液面計(中英文版) Carbon steel glass floater level indicator |
|||
SJ/T 10753-2015 電子器件用金、銀及其合金焊料(中英文版) (Electronics with gold, silver and alloy solder) |
|||
GB/T 39560.6-2020 電子電氣產品中某些物質的測定 第6部分:氣相色譜-質譜儀(GC-MS)測定聚合物中的多溴聯苯和多溴二苯醚(中英文版) Determination of certain substances in electrical and electronic products—Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry(GC-MS) |
|||
GB/T 8260-2008 卡箍式柔性管接頭 型式與尺寸(中英文版) Types and dimensions of flexible joints of housing |
|||
GB 11533-2011 標準對數視力表(中英文版) Standard for logarithmic visual acuity charts |
|||
TB/T 3307.7-2014 高速鐵路道岔製造技術條件 第7部分:預埋塑膠套管(中英文版) (High-speed railway turnout manufacturing requirements - Part 7: embedded plastic sleeve) |
|||
HG/T 20515-2014 儀錶隔離和吹洗設計規範(中英文版) Design code for instrument seal and purge |
|||
GB/T 38788-2020 豬多能幹細胞建系技術規範(中英文版) Technical specification for establishment of porcine pluripotent stem cells |
|||
CJ/T 179-2003 自力式流量控制閥(中英文版) Self-operated flow control valve |
|||
GB/T 30058-2013 國際多式聯運單據備案與查詢規則(中英文版) Rules for record filling and enquiry of international multi-model transportation documents |
|||
GB/T 12464-2016 普通木箱(中英文版) wooden boxes |
|||
SN/T 4077-2014 齒蘭環斑病毒檢疫鑒定方法(中英文版) (Odontoglossum ringspot virus quarantine and identification methods) |
|||
GB/T 37366-2019 塔式起重機安全監控系統及資料傳輸規範(中英文版) Tower crane safety monitor system and data transmission specifications |
|||
YD/T 1197-2002 接入網測試方法 ——3.5ghz固定無線接入(中英文版) Test specification for access network. 3.5GHz fixed wireless access |
|||
GB 50897-2013 裝飾石材工廠設計規範(中英文版) Code for design of decorative stone plant |
|||
JC/T 2381-2016 修補砂漿(中英文版) (Repair mortar) |
|||
GB/T 22078.3-2008 額定電壓500kV(Um=550kV)交聯聚乙烯絕緣電力電纜及其附件 第3部分: 額定電壓500kV(Um=550kV)交聯聚乙烯絕緣電力電纜附件(中英文版) Power cables with cross-linked polyethylene insulation and theiraccessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) |
|||
GB/T 11060.3-2018 天然氣 含硫化合物的測定 第3部分:用乙酸鉛反應速率雙光路檢測法測定硫化氫含量(中英文版) Natural gas─Determination of sulfur compound─Part 3:Determination of hydrogen sulfide content by lead acetate reaction rate dual photo path method |
|||
GB 5863-1993 內河助航標志(中英文版) Aids to navigation on inland waterways |
|||
GB/T 22638.2-2008 鋁箔試驗方法 第2部分:針孔的檢測(中英文版) Test methods for aluminium and aluminium alloy foils - Part 2: Determination of porosity |
|||
SB/T 10048-1992 活拔鵝毛絨技術條件(中英文版) (Pull plush goose live technical conditions) |
|||
SN/T 2105-2008 化妝品中檸檬黃和桔黃等水溶性色素的測定方法(中英文版) Determination of tartrazine & sunset yellow water-solubility colour in cosmetics |
|||
GB/T 15629.16-2017 資訊技術 系統間遠端通訊和資訊交換 局域網和都會區網路 特定要求 第16部分:寬頻無線多媒體系統的空中介面(中英文版) Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks—Specific requirements—Part 16: Air interface for broadband wireless multimedia systems |
|||
GB/T 5451-2001 農藥可濕性粉劑潤濕性測定方法(中英文版) Testing method for the wettability of dispersible powders of pesticides |
|||
YD/T 1065.1-2014 單模光纖偏振模色散的試驗方法 第1部分:測量方法(中英文版) (PMD test methods for single-mode fiber Part 1: Methods of measurement) |
|||
GB/T 18865-2002 橡膠與橡膠製品 實驗室間試驗確定的重複性值和再現性值置信區間(中英文版) Rubber and rubber products--Confidence intervals for repeatability and reproducibility values determined by inter-laboratory tests |
|||
QB/T 2775-2006 自來水筆(中英文版) Fountain pen |
|||
DL/T 634.56-2010 遠動設備及系統 第5-6部分:iec60870-5 配套標準一致性測試導則(中英文版) Telecontrol equipment and system. Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards |
|||
SY/T 5587.9-1993 油水井常規修井作業 換井口裝置作業規程(中英文版) (Conventional oil wells, workover operations. In other wellhead equipment operating procedures) |
|||
GB/T 40843-2021 跨境電子商務 產品追溯資訊共用指南(中英文版) Cross-border E-commerce—Guidelines for sharing of products traceability information |
|||
QB/T 1255-2007 皮夾克油(中英文版) Leather jacket gloss agent |
|||
GB/T 27751-2011 銀鎳石墨電觸頭技術條件(中英文版) Specification for AgNiC contact |
|||
SN/T 0480.6-1995 出口重晶石分析方法 密度的測定(中英文版) Method of analysis of baryte for export. Determination of density |
|||
GB/T 15733-1995 金融電子化基本術語(中英文版) The basic terminology of financial computerization |
|||
QC/T 543-1999 汽車柴油機“S”尺寸的I型螺紋安裝噴油器體(中英文版) (Automotive diesel S size of type I screwed injector body) |
|||
GB 16174.1-2015 手術植入物 有源植入式醫療器械 第1部分:安全、標記和製造商所提供資訊的通用要求(中英文版) Implants for surgery—Active implantable medical devices—Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
|||
SJ/Z 9079-1987 光學字元辨識列印規範(中英文版) Printing specifications for OCR |
|||
JT/T 33.12-1993 交通行業工人技術等級標準 公路工程與航務工程 路基工(中英文版) Technical grade standards for workers in the communications industry. Communications engineering. Earthwork workers |
找到:115477條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1526] [1527] [1528] [1529] [1530] [1531] [1532] |